15 IKEA Kallax Makeover Ideas for Shared Kids’ Rooms
IKEA Kallax makeover ideas turn a plain cube shelf into custom furniture that two kids can actually share. This guide gives you 15 ideas, each with a photo prompt, a materials note, and a five-item shopping list.
Picture a freshly painted cube that feels satin-smooth under small hands. Imagine soft felt bins that thump quietly when they drop into place, and a reading cushion that still smells faintly of cotton and sunshine. Warm LED light spills across a bedroom wall at dusk. A shared room feels calmer when every child has a corner that is clearly theirs.
Here are 15 ideas worth saving — and stealing.
Why IKEA Kallax Makeover Ideas for Shared Kids’ Rooms Work So Well
The Kallax is a square-cubed shelf with a simple grid, a particleboard-and-fiberboard frame, and a clean white or wood-grain finish. It became a staple of the “IKEA hack” movement because the openings are a consistent size, roughly 13 inches square, so inserts, doors, and cushions from many makers fit them. That uniformity is what makes it so customizable.
The most useful materials are cheap and easy to find: peel-and-stick wallpaper, cabinet-grade acrylic paint in satin finish, birch plywood, fabric drawer inserts, tapered wood legs, and plug-in LED strips. Soft sage, warm mustard, dusty blue, and blush pink are the colors that show up most often in shared bedrooms because they work for any child.
The trend is practical. Families are fitting more kids into fewer bedrooms, and Pinterest boards for shared rooms keep growing. Parents want furniture that divides space, stores toys, and survives years of use.
Beginners can do most of these. A budget of 20–60 per project is realistic, though anything involving cutting wood or drilling the frame needs patience and the right bit. Particleboard chips easily, so skip the shortcuts.
| Style at a Glance | |
| Philosophy | Give every child a defined zone without buying new furniture |
| Key Materials | Satin acrylic paint, birch plywood, fabric inserts, peel-and-stick wallpaper, LED strips |
| Key Colors | Sage green, dusty blue, warm mustard, blush pink, natural birch |
1. The Two-Tone Kallax Makeover That Gives Each Kid Their Own Side for Under $35

Paint the left half of a 2×4 Kallax one color and the right half another, so each child owns a side. The satin finish wipes clean, and the two soft shades read as intentional rather than loud.
Material note: Sand lightly with 220-grit paper, apply one coat of bonding primer, then two thin coats of satin acrylic enamel. One quart covers a 2×4 for about $18 and each coat needs 4 hours to dry. The common beginner mistake is skipping primer, which makes the laminate peel within weeks.
Color note: Sage and dusty blue share the same gray undertone, so they sit together calmly instead of competing. Keep the center divider white to separate them cleanly.
Finishing swap: Add two matching brass-tone number knobs, 1 and 2, on the top edge for about $8. Suits siblings of any age who argue over “mine.”
💡 Quick Win: Press the painter’s tape edge down with a credit card before painting to stop color bleeding underneath.
Shop The Look
- Frog tape delicate surface painter’s tape, 1.41 inch
- Zinsser bonding primer, quart, white
- Satin acrylic enamel cabinet paint, sage green, quart
- Satin acrylic enamel cabinet paint, dusty blue, quart
- 220-grit sanding sponge block, 6-pack
Also view: 10 IKEA Kallax Makeover Ideas for Seasonal Home Organization
2. Color-Coded Bin Inserts That End the “Who Left This Out?” Argument

Fabric inserts make every cube a labeled drawer. Assign mustard to one child and slate to the other, and a lost toy has an obvious home. The soft sides also protect fingers and floors.
Material note: Buy 13-inch felt or canvas cubes with reinforced rims, about 2–4 each, so eight cost roughly $24. Measure the opening first because some bins are 12 inches and flop around inside. Don’t overfill or the sides will bow.
Color note: Mustard and slate are strong contrasts that stay neutral enough for any wall color. Matching handles tie each side together.
Finishing swap: Slide a laminated tag, a 2-inch cardstock rectangle on jute twine, into each handle for about $6. Suits parents who want the system to last past week one.
Shop The Look
- Collapsible felt storage cubes, 13 inch, mustard yellow, set of 4
- Collapsible felt storage cubes, 13 inch, slate gray, set of 4
- Laminated cardstock tag holders with jute twine
- Soft-sided canvas bins with handles
- Reusable dry-erase label stickers
3. The Back-to-Back Kallax Room Divider With a Plywood Panel

Two 4×2 Kallax units pushed together with their backs touching create a waist-high divider about 30 inches tall. Each child gets their own shelves, and the room stays open for light.
Material note: Screw the two units together with four metal corner brackets and two joining plates, about $12, then secure the top to the wall with an anti-tip strap. A thin 1/4-inch birch plywood sheet, around $15, can cover the exposed back for a finished look. Measure twice before cutting, because plywood chips on the cut side.
Color note: Birch and white keep the divider neutral so each side can have its own bedding colors.
Finishing swap: Tuck adhesive cork squares into the back panel for pinned art, about $10. Suits school-age kids who bring drawings home weekly.
Shop The Look
- Anti-tip furniture wall straps, heavy-duty, 4-pack
- Metal corner braces, 2-inch, 12-pack
- Thin birch plywood sheet, 1/4 inch, 30×30 inch
- Self-adhesive cork tiles, 12×12 inch, 6-pack
- Felt furniture pads, round, large
4. A Kallax Storage Bench With a Cushion Top for About $45

Turn a 1×4 Kallax on its side and you have a bench about 15 inches high, wide enough for two small kids to put on shoes together. The cubes below hold sneakers and boots.
Material note: Cut a 2-inch foam pad to 58×15 inches, wrap it in batting and fabric, and staple underneath, for around $30 in supplies. Do not skip the non-slip pad under the cushion or it will slide. Allow one evening for the staple gun work.
Color note: Blush pink against white reads soft and clean, and a woven basket adds warmth.
Finishing swap: Attach two wall hooks above at kid height for about $9. Suits families with a tiny entry or a room that opens straight onto a hallway.
💡 Quick Win: Buy a ready-made bench cushion cover instead of sewing one.
Shop The Look
- High-density upholstery foam, 2 inch thick, cut to size
- Bouclé fabric by the yard, blush pink
- Heavy-duty staple gun with 3/8 inch staples
- Non-slip rug pad, cut-to-size
- Woven seagrass baskets, 12 inch cube
5. Peel-and-Stick Wallpaper Backs for a Kallax Makeover That Costs $28

A single roll of peel-and-stick wallpaper lines the back of every cube, so a basic white shelf gets an interior that looks custom. Different patterns on each child’s side keep ownership obvious.
Material note: One 20-inch by 18-foot roll costs about $28 and lines roughly 16 cube backs. Cut each piece 1/8 inch smaller than the opening, because the sheet will not stretch. Smooth from the center outward to push out air bubbles.
Color note: Green and cream with terracotta accents feel grounded, and the pattern hides fingerprints.
Finishing swap: Frame a 5×7 art print in a mini frame inside one cube, about $8. Suits kids who like collecting figurines.
Shop The Look
- Peel-and-stick wallpaper, green botanical, 20 inch x 18 ft
- Wallpaper smoothing tool and squeegee
- Precision craft knife with 10 spare blades
- Self-healing cutting mat, 12×18 inch
- Mini picture frames, 5×7, set of 4
6. The Kallax Desk With Butcher Block Top for Two Homework Stations

Two 2×2 Kallax units become the legs of a long desk, with a butcher block or wood plank laid across the top. Each side’s cubes hold supplies for one child.
Material note: Use a 72×25 inch butcher block top, about $70 or a pine board at $35, and fix it with L-brackets screwed into the Kallax top. Leave a 24-inch gap between the units for knees. The beginner mistake is forgetting to seal raw wood, so apply two coats of clear polyurethane.
Color note: Honey oak against white looks warm, and navy chairs add contrast without clutter.
Finishing swap: Mount a pegboard strip above for pens and scissors, about $15. Suits grade-schoolers who finally have homework.
Shop The Look
- Pine edge-glued panel, 72×25 inch
- Water-based clear polyurethane, satin, quart
- L-shaped steel brackets, 3 inch, 8-pack
- Desktop pencil cup organizer set
- Adjustable LED clip-on desk lamps, 2-pack
7. Tapered Wood Legs That Lift Your Kallax Makeover Into Mid-Century Territory

Four angled legs lift the shelf about 6 inches off the floor, which shows more floor, makes vacuuming easier, and gives the piece a furniture-store look.
Material note: Buy a set of four 6-inch tapered legs with top plates, about $20, and attach them with the included screws into a 3/4-inch plywood base piece you add underneath, since particleboard strips easily. Pre-drill every hole. Allow about 30 minutes.
Color note: Oak legs bring warmth to a white shelf, while olive in the decor adds a grounded accent.
Finishing swap: Wrap each leg’s base in a felt pad, about $5, so it doesn’t scratch floors. Suits rental rooms with hardwood floors.
💡 Quick Win: Use leg kits sold with the mounting plates already attached.
Shop The Look
- Tapered wood furniture legs, 6 inch, set of 4 with plates
- Pre-cut plywood base board, 3/4 inch
- Wood screw assortment, #8 x 1 inch
- Self-adhesive felt pads for chair legs
- Cordless drill driver with 1/8 inch bit
8. Picture-Label Cubes So Non-Readers Can Tidy Up Alone

Pictures replace words for kids who can’t read yet. A drawing of blocks, cars, or books tells a three-year-old where each toy belongs, and tidying becomes a game.
Material note: Cut round wooden discs, 3 inches wide, from craft stock for about $8 per pack of 24, then draw icons with a fine permanent marker. Seal with matte spray to stop smudging. The common mistake is using a water-based marker, which runs.
Color note: Charcoal drawings on pale wood read clearly against oatmeal linen.
Finishing swap: Loop each tag onto a bin handle with 2 feet of jute twine, about $4 for a spool. Suits preschoolers learning to help.
Shop The Look
- Unfinished wooden circle discs, 3 inch, 24-pack
- Fine-tip black permanent marker, oil-based
- Matte clear acrylic spray sealer
- Natural jute twine, 3-ply spool
- Oatmeal linen-look storage bins, 13 inch
9. A Built-In Reading Nook Using a Horizontal Kallax

A horizontal 2×4 Kallax makes a long, low seat with book storage built in. A cushion on top and a curtain overhead turn a corner of the room into a quiet retreat for either child.
Material note: Cut a 3-inch foam cushion to 60×15 inches and cover it with a washable cotton duck fabric, about $35 total. Hang a sheer curtain on a tension rod, $12, so it stays rental-friendly. Don’t sit adults on it, as the Kallax is built for light loads.
Color note: Dusty blue and cream keep the nook calm enough for sleepy reading.
Finishing swap: Clip a plug-in wall sconce on the wall for about $20. Suits kids who read before bed.
Shop The Look
- Tension curtain rod, 48–84 inch, white
- Sheer white curtain panel, 84 inch
- Cotton duck canvas fabric, natural, by the yard
- Plug-in wall sconce with fabric shade
- Quilted floor pillows, 18 inch, set of 2
10. Kallax Cabinet Doors That Hide the Chaos

Door inserts hide the clutter in selected cubes, so the room looks calm at a glance. Mix open and closed cubes for a deliberate pattern.
Material note: Use ready-made Kallax-sized door inserts, about $12 each, or cut 1/4-inch MDF to 12.5 inches square, paint, and mount with magnetic catches. Two doors cost about $25. Test the fit before painting.
Color note: White doors and oak knobs match nearly any bedding, so the shelf won’t clash as kids grow.
Finishing swap: Replace the stock handle with a round 1-inch oak knob, $2 each. Suits parents who prefer a clean look in a shared space.
Shop The Look
- Kallax door inserts, white, 13 inch, set of 2
- Round wooden drawer knobs, 1 inch, oak, 10-pack
- Magnetic cabinet catches, ultra-slim, 8-pack
- MDF craft panels, 1/4 inch, 12×12 inch
- Self-adhesive door bumpers, clear
11. Rolling Kallax Toy Storage on Locking Casters

Put a 2×2 Kallax on casters and toy storage follows the play, from the bedroom to the living room, then rolls back at night.
Material note: Screw four 2-inch locking swivel casters, $14 for a set, into a 3/4-inch plywood base cut to 30 inches square, then place the Kallax on top. Choose casters rated for 40 lb each. The mistake to avoid is using short screws that pull out.
Color note: Black wheels give a graphic edge, and coral and teal bins keep it cheerful.
Finishing swap: Add a rope pull handle, $5, to the front. Suits younger siblings who share a play area.
💡 Quick Win: Choose a caster set sold with a mounting plate already included.
Shop The Look
- Locking swivel casters, 2 inch, set of 4
- Plywood panel, 3/4 inch, 30×30 inch
- Cotton rope drawer pull, 6 inch
- Coral and teal fabric bins, 13 inch, set of 4
- Heavy-duty wood screws, #10 x 1.5 inch
12. A Kallax Play Kitchen Makeover for About $40

A 2×2 Kallax, a mixing bowl, and a few knobs make a play kitchen that holds pots in the cubes. It stands about 30 inches tall, a comfortable height for kids aged three to six.
Material note: Set a 10-inch stainless bowl into a hole cut into a 3/4-inch top panel, glue on a faucet, and paint four black burners with craft paint. Supplies total around $40. Use a jigsaw for the hole and sand the edge smooth.
Color note: Mint and copper feel retro, and white keeps it clean.
Finishing swap: Tie a mini apron from a dish towel on a hook, about $6. Suits imaginative siblings who play restaurant together.
Shop The Look
- Stainless steel mixing bowl, 10 inch
- Jigsaw with fine-tooth wood blade
- Small silver push-lights, battery, 3-pack
- Wooden play food set, 30 pieces
- Craft paint set, black and copper
13. LED-Lit Cubes for a Soft Bedtime Glow

Stick a warm LED strip under the top shelf of each cube and the Kallax becomes a nightlight. Kids who dislike a dark room settle faster with a gentle glow.
Material note: One 16-foot warm white (2700K) strip costs about $14 and lights eight cubes, with a dimmer cord switch for $6. Clean the surface with rubbing alcohol before sticking. The mistake: cutting the strip anywhere other than the marked lines.
Color note: Warm gold light on charcoal looks rich, while navy accents deepen the nighttime effect.
Finishing swap: Run the cord through a cable clip strip, about $5, and hide the plug behind the shelf. Suits kids afraid of the dark.
Shop The Look
- Warm white 2700K LED strip lights, 16 ft, plug-in
- Inline dimmer switch for LED strips
- Cable management clips, adhesive, 50-pack
- Isopropyl alcohol wipes, individually wrapped
- Small glass jars with cork lids, set of 6
14. A Kallax Headboard Between Two Twin Beds

An upright 1×4 Kallax between two beds acts as a shared nightstand and headboard divider. Each child gets cubes on their side for books and a glass of water.
Material note: The unit is about 58 inches tall, so fasten it to the wall with a steel anti-tip kit, $8. Add a 3/4-inch plywood top plate to hold the lamp, cut for about $10. Don’t skip anchoring, because kids will climb.
Color note: Oatmeal and slate blue bedding keeps the pair matched while the white shelf bridges them.
Finishing swap: Hang two small reading lights clipped on the shelf side, about $16. Suits siblings who go to bed at different times.
Shop The Look
- Clip-on LED book light, rechargeable, 2-pack
- Steel anti-tip furniture anchor kit
- Washable linen duvet cover, twin, oatmeal
- Small ceramic table lamp with linen shade
- Silicone-coated drinking cups with lids
15. A Kallax Display Gallery for Each Child’s Art and Treasures

Give each child four cubes to curate like a mini museum. Drawings, shells, and clay creations sit in little frames with name labels, which teaches kids to value what they make.
Material note: Stand mini easels, $9 for a set of 6, hold flat art in each cube, with putty to hold small objects. Rotate the display monthly. Avoid direct sun on paper, which fades crayon in a few weeks.
Color note: White cubes with brass labels and terracotta objects look polished without trying hard.
Finishing swap: Stick a brass name plate, $7 for 6, under each cube so every display has a title. Suits creative kids who save everything.
💡 Quick Win: Use removable museum putty to keep objects from tipping.
Shop The Look
- Mini tabletop easels, wooden, 3 inch, 6-pack
- Museum putty, reusable, clear
- Small brass name plate stickers, blank, 6-pack
- Mini picture frames, 4×6, white, set of 4
- Acrylic display risers, clear, set of 3
How to Start Your Kallax Makeover Project
Begin with the paint-and-insert combo from ideas 1 and 2. It costs under $60, needs no power tools, and shows you how a Kallax responds to sanding and finish before you commit to cutting or drilling.
The most common mistake is skipping the primer on laminate surfaces, then watching the paint scratch off in a month. Fix it by sanding lightly with 220-grit paper, wiping with a damp cloth, and applying a bonding primer first.
For budget entry points, three items under $50 go furthest: a quart of satin cabinet enamel in sage green at about $18, a set of eight 13-inch felt bins at around $24, and a 16-foot warm white LED strip for about $14.
Expect a weekend for most projects. Paint and inserts take one afternoon plus drying time, while desk builds and casters take a full day. A starter project runs 40–60, and a full shared-room setup, with divider, desk, and lighting, runs 200–350 over a few weekends.
Frequently Asked Questions About IKEA Kallax Makeover Ideas for Shared Kids’ Rooms
Can you paint IKEA Kallax shelves without sanding?
You can, but the result peels faster. Kallax finishes are smooth laminate, so paint needs something to grip. A quick pass with 220-grit sandpaper plus a bonding primer takes about 20 minutes and makes the paint last for years of toy-throwing.
What colors work best for a Kallax in a shared kids’ room?
Soft, muted shades like sage green, dusty blue, and warm mustard work for both boys and girls, and they hold up as kids age. Use one color per child on their side, and keep the frame white for a cohesive look.
How much does a Kallax makeover cost?
A paint-and-insert refresh runs about 40–60. A divider, desk, or bench build usually costs 60–120 on top of the Kallax itself, which starts around 40–90 depending on size. The cheapest upgrades are paint, wallpaper, and labels.
Is a Kallax safe for young kids?
It is safe if anchored to the wall with a furniture strap. Kids climb, and an unsecured tall unit can tip. Keep heavy items on bottom shelves and use only soft-sided bins on lower cubes where small hands reach.
What is the best Kallax size for a small shared bedroom?
A 2×4 is the most flexible. It is about 30 inches tall and 60 inches wide, which fits under a window and works as a low divider or bench. A 1×4 upright suits tight spaces between beds.
Ready to Make Over Your Shared Kids’ Room With Kallax Ideas?
You now have 15 ways to turn one humble shelf into a divider, desk, nook, nightlight, or play kitchen. Starting small is the right approach, so pick the idea that solves your daily frustration first. Today, measure one cube opening and order a quart of bonding primer. When your kids reach for their color-coded bins and find a space that is theirs, the room finally feels like it belongs to both of them. Save your favorites, especially the sage-and-blue split shelf and the glowing bedtime cubes, and pin them for your next weekend.

One Comment